A super watchface on the Amazfit GTR3 (no pro).
I don’t see the blood icon under the day of the week in my watchface? How to get, an for what is it for?
The AOD is also very easy to read with large numbers.
It would be helpful to see the battery indicator in % in the watchface and on the AOD. Just like the battery indicator for the smartphone.
AOD synchronises the values quickly and correctly with Watchdrip+.
The “normal” watch face, on the other hand, usually shows a line through an outdated value.
I was afraid that no one would ever reply here.
Good to know I’m not the only one with the AOD vs Normal problem.
The watchfaces from nimrod100 also seem to have the problem of delayed display, but only for a few seconds.
Hi,
All GTS 4 Mini have 2 problems with all watch faces.
On the one hand, there are completely irregular reboots.
And on the other hand, the normal display is not updated when the AOD is disabled.
My solution for 4RK4N’s Watcface is:
I modified the file “..\watchface\gts4mini\index.js”.
414 // AOD runs on a timer, normal uses widget_delegate for updates
415 if (watchDrip.isAOD()) {
416 logger.log(“IS_AOD_TRUE”);
417 watchDrip.startTimerDataUpdates();
418
419 } else {
420 logger.log(“IS_AOD_FALSE”);
+ watchDrip.startTimerDataUpdates();
421 hmUI.createWidget(hmUI.widget.WIDGET_DELEGATE, {
422 resume_call: (function() {
423 logger.log(“resume_call”);
424 watchDrip.checkUpdates();
425 // Update watch battery
426 updateWidgets();
427 }),
This fixes both problems.
The normal Watcface also works without AOD.
And there are no more annoying reboots.
Hello, maybe you can help me, I have an amazfit balance watch, I opened this watch face, but it doesn’t show the amount of glucose, there is no data, I do everything according to the instructions?
Hi
To get back to the reboots of the GTS 4 Mini.
The value on the display and the AOD is usually updated every 5 minutes.
At any point in time this will not work. The AOD of the clock tries to retrieve the current value twice, so you see the symbol of the charging process. If no value is returned on the second attempt, the clock restarts.
With your and Nimrod100’s watchface, this happens for the first time after about 30 minutes after a new installation and then repeats itself about every 10 – 30 minutes.
With the watch face from 4RK4N this happens once a day.
If you switch the AOD off, this error does not occur.
The WatchDripp_App works at all times.
Hello, maybe you can help me, I have an amazfit balance watch, I opened this watch face, but it doesn’t show the amount of glucose, there is no data, I do everything according to the instructions?
Hello, maybe you can help me, I have amazfit balance watch, I opened this watch face, but it doesn’t show the amount of glucose, there is no data, I do everything according to the instructions?
Hi,
Do you also have the WatchDrip_App installed? And does the WatchDrip_App display the values?
Have you tried turning the AOD on or off?
I don’t think the Amazfit Balance is yet one of the supported devices. But trying it out is always the best option.
Good luck
Hi,the app is installed on the watch and the phone, it shows the values, but the watchface of the watch itself does not show the amount of glucose(NO DATA), the same with AOD. Maybe the face is not suitable? What should I do to get the data? Thanks.
Good question.
It was often enough if the watch display had the same size as a watch that was already supported.
But since other hardware is now installed in the watches, you will have to wait until the developers take care of the watch.
Amazfit trex2, how to turn on alarms and high or low glucose, the alarm switch is not active in the watch drip (data is transmitted, but there are no alarms)
I’ve studied Artem’s entire blog, alarm are configured only in older versions of Watch drip , on older watch models, the enable device option is available and it activates enable alarms in the watch drip program, on new versions of watch drip for trex2 , miband7 watches, this function is not active because the switch is not active
First you need to activate in xDrip+ -> Settings -> Alerts -> Glucose – Alarm – Settings -> Notification Channels (for Android 8+).
In the Zepp app, I enabled app notifications for xDrip+ and added a long 10 second vibration to the app notification vibration mode.
Now if there is a high or low alarm, the GTS 4 Minini will vibrate for 10 seconds. The alarm will repeat until the values in xDrip+ return to normal or you silence the alarms in xDrip+.
If there is another option, please let me know.
I have a T-Rex 2 also and am having the same issue unfortunately. Same with my Mi Band 7. No low/high alerts, even after enabling Notification Channels (Android 8+) in xDrip+. Just for clarification, I’m enabling xDrip+ in App alerts in Zepp? If so, I’ve done this and am still getting nothing 🙁 Any other suggestions?
Hi,
The restarts of the GTS 4 Mini and the updating of the values on the standard display are not due to a program error.
Only the timings in the constants file are responsible for this.
Sorry for my mistake. The GTS 4 Mini runs absolutely perfectly and error-free for me with the watch face and the WatchDrip_App on its home blog page. Even the FSL-3 values are updated correctly every 1 minute.
Thank you very much for this great program and all the best to you and your family.
Hello Jensen how could you fix the watchface for the gts4mini
I have the same problems then you but i coudlnt fix them, rendom restart, values not refreshed …
Hello Jensen how could you fix the watchface for the gts4mini
I have the same problems then you but i coudlnt fix them, rendom restart, values not refreshed …
Hi everyone.
I have installed xDrip+ and Watchdrip to send glucose measurements to my Amazfit GTR3 Pro watch. When I enter in watchdrip.org website to download a watchface for my watch, the QR code I obtain does not lead anywhere. It points to a page that no longer exists, at watchface://dev.thatguys-service.blablabla… Is there any other place to download that face, the base watchface? Or maybe i’m doing something wrong?
Thanks.
33 Responses
Добрый день. В чем загвоздка, виснет все на загрузке? Как установить цыферблат?
A super watchface on the Amazfit GTR3 (no pro).
I don’t see the blood icon under the day of the week in my watchface? How to get, an for what is it for?
The AOD is also very easy to read with large numbers.
It would be helpful to see the battery indicator in % in the watchface and on the AOD. Just like the battery indicator for the smartphone.
AOD synchronises the values quickly and correctly with Watchdrip+.
The “normal” watch face, on the other hand, usually shows a line through an outdated value.
I have same issue, normal watchface dont update glucose data but AOD yes.
I was afraid that no one would ever reply here.
Good to know I’m not the only one with the AOD vs Normal problem.
The watchfaces from nimrod100 also seem to have the problem of delayed display, but only for a few seconds.
I uninstalled the watchface 3 days ago (in Zepp).
Then “re-scanned” it.
Since then, the normal watchface is also uptodate, like the AOD.
For me this not solution don´t work.
Здравствуйте, циферблат не устанавливается загрузка зависает
Hi,
All GTS 4 Mini have 2 problems with all watch faces.
On the one hand, there are completely irregular reboots.
And on the other hand, the normal display is not updated when the AOD is disabled.
My solution for 4RK4N’s Watcface is:
I modified the file “..\watchface\gts4mini\index.js”.
414 // AOD runs on a timer, normal uses widget_delegate for updates
415 if (watchDrip.isAOD()) {
416 logger.log(“IS_AOD_TRUE”);
417 watchDrip.startTimerDataUpdates();
418
419 } else {
420 logger.log(“IS_AOD_FALSE”);
+ watchDrip.startTimerDataUpdates();
421 hmUI.createWidget(hmUI.widget.WIDGET_DELEGATE, {
422 resume_call: (function() {
423 logger.log(“resume_call”);
424 watchDrip.checkUpdates();
425 // Update watch battery
426 updateWidgets();
427 }),
This fixes both problems.
The normal Watcface also works without AOD.
And there are no more annoying reboots.
Greetings Jensen
Me again
After not having any reboots for 14 days, it happened again.
So the solution given above doesn’t work.
it loaded normally earlier, now when scanning the qr code, it writes a DOWNLOADED FAILED, what happened?
Hello, maybe you can help me, I have an amazfit balance watch, I opened this watch face, but it doesn’t show the amount of glucose, there is no data, I do everything according to the instructions?
Hi
To get back to the reboots of the GTS 4 Mini.
The value on the display and the AOD is usually updated every 5 minutes.
At any point in time this will not work. The AOD of the clock tries to retrieve the current value twice, so you see the symbol of the charging process. If no value is returned on the second attempt, the clock restarts.
With your and Nimrod100’s watchface, this happens for the first time after about 30 minutes after a new installation and then repeats itself about every 10 – 30 minutes.
With the watch face from 4RK4N this happens once a day.
If you switch the AOD off, this error does not occur.
The WatchDripp_App works at all times.
Greetings Jensen
Hello, maybe you can help me, I have an amazfit balance watch, I opened this watch face, but it doesn’t show the amount of glucose, there is no data, I do everything according to the instructions?
Hello, maybe you can help me, I have amazfit balance watch, I opened this watch face, but it doesn’t show the amount of glucose, there is no data, I do everything according to the instructions?
Hi,
Do you also have the WatchDrip_App installed? And does the WatchDrip_App display the values?
Have you tried turning the AOD on or off?
I don’t think the Amazfit Balance is yet one of the supported devices. But trying it out is always the best option.
Good luck
Greetings Jensen
Hi,the app is installed on the watch and the phone, it shows the values, but the watchface of the watch itself does not show the amount of glucose(NO DATA), the same with AOD. Maybe the face is not suitable? What should I do to get the data? Thanks.
Good question.
It was often enough if the watch display had the same size as a watch that was already supported.
But since other hardware is now installed in the watches, you will have to wait until the developers take care of the watch.
Amazfit trex2, how to turn on alarms and high or low glucose, the alarm switch is not active in the watch drip (data is transmitted, but there are no alarms)
Plz help
Hi,
Look for alarm on the page “https://bigdigital.home.blog/” in the thread Zepp OS… Take all entries into account and you will find a solution.
Greetings Jensen
I’ve studied Artem’s entire blog, alarm are configured only in older versions of Watch drip , on older watch models, the enable device option is available and it activates enable alarms in the watch drip program, on new versions of watch drip for trex2 , miband7 watches, this function is not active because the switch is not active
Do you have a solution?
Hello Ilya,
First you need to activate in xDrip+ -> Settings -> Alerts -> Glucose – Alarm – Settings -> Notification Channels (for Android 8+).
In the Zepp app, I enabled app notifications for xDrip+ and added a long 10 second vibration to the app notification vibration mode.
Now if there is a high or low alarm, the GTS 4 Minini will vibrate for 10 seconds. The alarm will repeat until the values in xDrip+ return to normal or you silence the alarms in xDrip+.
If there is another option, please let me know.
Greetings Jensen
I have a T-Rex 2 also and am having the same issue unfortunately. Same with my Mi Band 7. No low/high alerts, even after enabling Notification Channels (Android 8+) in xDrip+. Just for clarification, I’m enabling xDrip+ in App alerts in Zepp? If so, I’ve done this and am still getting nothing 🙁 Any other suggestions?
Hi,
The restarts of the GTS 4 Mini and the updating of the values on the standard display are not due to a program error.
Only the timings in the constants file are responsible for this.
Sorry for my mistake. The GTS 4 Mini runs absolutely perfectly and error-free for me with the watch face and the WatchDrip_App on its home blog page. Even the FSL-3 values are updated correctly every 1 minute.
Thank you very much for this great program and all the best to you and your family.
Greetings Jensen
Hello Jensen how could you fix the watchface for the gts4mini
I have the same problems then you but i coudlnt fix them, rendom restart, values not refreshed …
Hello Jensen how could you fix the watchface for the gts4mini
I have the same problems then you but i coudlnt fix them, rendom restart, values not refreshed …
Hello Yassine Boudyach, i didn’t have to repair anything.
I got the 4RK4N watch face from here
https://bigdigital.home.blog/2022/12/21/zepp-os-devices-support/
taken and this works for me.
Greetings Jensen
Okey thanks, for me it does refresh sometimes but sometimes it doesn’t … thanks anyway
Hi everyone.
I have installed xDrip+ and Watchdrip to send glucose measurements to my Amazfit GTR3 Pro watch. When I enter in watchdrip.org website to download a watchface for my watch, the QR code I obtain does not lead anywhere. It points to a page that no longer exists, at watchface://dev.thatguys-service.blablabla… Is there any other place to download that face, the base watchface? Or maybe i’m doing something wrong?
Thanks.
Hi,
Follow the link here two entries above to the blog from bigdigital and follow the installation instructions.
Greetings Jensen
Не загружается циферблат 3 pro. Есть какое-то решение. На старом телефоне все работало. На новом прога в часы ставиться ,циферблат нет.
Так и не удалось загрузить циферблат для Amazfit GTR3 Prо в Zepp. Как и писал ранее, сама прога с QR кода составилась , а циферблат не как.
Здравствуйте, а можно этот циферблат сделать для Amazfit balance?
Программа отлично встала на часы, а циферблата нету :((